Packaging and Labelling of Frozen Food

-- O.S Gautam

The objective of freezing a commodity is to preserve and prolong its life. Fruits, vegetables, fish and several other food items are very seasonal in nature. Freezing enables surplus of the season to be preserved and make it available through out the year and to a wider geographic area. Frozen commodity keeps well at or below –18 degree Celsius. Any upward temperature fluctuations may result in activation of microbial, enzymatic and oxidative activities which may either degrade the food value or render the product unfit for human consumption altogether. However it is almost impossible to keep a frozen commodity without some degree of temperature fluctuation and abuse. At every step – warehousing, stacking, transportation, loading, unloading, merchandising, and at retail shelf – frozen commodity undergoes through series of physical and thermal rigours. During such times good packaging plays a complimentary role and protects it from spoilage. Therefore right packaging is essential for keeping quality of a food and increasing its shelf life.

Role of Packaging in a Frozen Commodity

First and foremost objective of packaging is to protect a product from physical, chemical and biological hazards. It also performs various other functions i.e. making product handling and transportation much easier, easier storage and stackability, space utilization, for carrying information to customer, enhancing products’ appearance and consumer appeal , brand propagation and advertising and so on.

A good packaging with gas barrier properties is desired to pack frozen retail products, as air inside the cold storage is dry and has strong affinity to moisture. In poorly packaged foods, air has free passage in and out of the pack and keeps drawing moisture from the product. Eventually product looses its juiciness and gets dried and fibrous. If product is not wholesome like ground meat, ready foods where ingredients have already been chopped and have vast cut surfaces and water is no more bound inside the tissue cells, it speeds up the process of dehydration.

Even wholesome product, if not packaged properly, get dehydrated. Bruised points and injuries and cut surfaces then become diffusion point from where dried cold air of the frozen warehouse starts withdrawing moisture. Water evaporates at every stage, even in frozen state of a commodity, due to high water vapour pressure inside the product and low outside. At any point where commodity is unprotected from glaze and air inside the packaging and the air outside the packaging have access to the internal mass of commodity becomes a diffusion point. To supplement moisture loss from outer layers of the product and tissues, inner layers keep supplying moisture, resulting in a dried, fibrous and dehydrated product over a time. Only a packaging with gas barrier property or which is impervious to air and gases can arrest this process.

Free passage of air in and out of packaging also triggers fat oxidation and product may become rancid very fast due to break down of triglycerides into glycerol and free fatty acids. Free fatty acids react with oxygen to form various types of peroxides which generally possess unpleasant rancid smell.

Aromatic substances, which are mostly volatile oils and are responsible for specific flavours of a food, are also subject to oxidation and evaporation along with moisture migration. Although glazing a product with a thin layer of ice, marinades or any other coating like battering, breading etc protects it from dehydration up to some extent however several prepared foods and ready meals can not be glazed.

Free passage of oxygen in and out of the packaging also attributes to the oxidation of natural colour pigments in the fruits, vegetables and meats. Therefore a good packaging is very vital to protect a food .Apart from moisture migration and oxidation , packaging needs to protect commodity from microbial, physical and chemical contaminants from outside and also protect it from rigours of handling, transport and warehousing up to some extent .However packaging can not change or better what is already inside the commodity. Packaging can only preserve the status of the product, it can not change or better it.

Packaging for a frozen commodity should have following properties:

  • Should be able to withstand subzero temperatures for the length of commodity’s shelf life. Certain materials become brittle and fragile at low temperatures.
  • Should be made from food grade material and not leach out its contents and flavours into food.
  • Should have strong mechanical strength to hold the product and protect it from physical rigours of handling, transport, loading, unloading and the pressures of shelf.
  • should be impervious to gases and air.
  • Should not be permeable to water vapours. Permeable materials cannot be used with high moisture food other wise product gets dehydrated very fast.
  • Aroma permeability – packaging material also should have capacity to hold aromatic substances in the food from getting evaporated or getting oxidized.
  • Bacterial permeability – packaging should protect food from microbial invasion from outside and packaging material itself should not be a medium for their development.
  • Salability – packaged food will certainly should be properly sealed within the pack. Therefore packaging material should have good sealing property.
  • Printability – should be printable, as it has to carry labeling information.
  • Aseptic - should not be itself a source of contamination to the food.
  • Should protect food from exposure to sunlight as ultraviolet and infra red rays of sun have degrading impacts on food.
  • During freezing biological water gets converted into ice, which results in increase in volume. Therefore packaging should be flexible enough to accommodate such expansion.

Packaging has witnessed several advancements. Various alternatives are available today to meet specific requirements. Co-extruded, laminated and multilayered and several combinations of compounds are available. Polyethylene, polypropelene, cellulose, cellophane, polyvinyl chloride, polyester, nylon, polyamide, aluminium foils and their several combinations are used to develop good packaging materials.

Card board boxes still make a good outer packaging with better mechanical strength and easy printability. They do not make a good retail pack for frozen foods unless they are wax coated or coated with soma polymer. Card board boxes can not withstand rigorus of temperature abuse in the retail shelf. In the shelf product is freely available to customers for a glance of product and reading the labels. As it is frozen and temperature is low, once it is out of the display freezer, it comes in contact with ambient air, laden with high moisture contents. This moisture condenses over the box, which absorbs it and gets soggy in due course and as a result it looses its mechanical strength to hold the product. However lamination, waxing and shrink-wrapping reduce its moisture absorbing capacity.

Advancements in Packaging

Frozen foods can be packed in many ways – pouches, trays and cardboard boxes – whichever suits product and shelf requirements. There are several new advancements in packaging and some of them worth mentioning are as follows:

Vacuum Packing: Foods packed in vacuumised packaging keep better as product is fully cut off from the air thus dehydration and oxidation both are arrested completely. Microbial growth is also arrested as oxygen is not available for their respiration. However there are anaerobic bacteria which grow well in absence of oxygen i.e. Clostridium botulinum (toxin produced by C. botulinum causes food poisoning), therefore it should be ensured that product is free from such contaminations at the time of packing.

Vacuum packed products enjoy enhanced shelf life and keep quality and integrity of the commodity in much better way than normal packing. However material used for vacuum packing is expensive and will have impact on its selling price.

Packing in Modified Atmosphere: There is a new method of packing food in modified environment. Packing in modified atmosphere is achieved by first vacuumising the container. It removes air completely and fill the container with inert gases. Nitrogen and carbon dioxide and their mixtures are generally used for this purpose. Inert gases do not react with any component of food and thus keep it intact. They also cut off respiration for microbes. In vacuum packing product is always at negative pressure and at any point if packaging or its sealing gets damaged, vacuum is lost and again it is susceptible to oxidative changes and moisture migration however pressure of gases in the modified atmosphere packing is at equilibrium with atmospheric pressure. Damaged packaging will have its negative impact here also but negative pressure is not there.

Heat Stable Packaging: Laminated cellophane with polyethelene or coating aluminum with heat stable and sealable films make a very good packaging. This kind of packaging comes handy in frozen “Ready to Eat” and “Ready to Cook” foods. Food can be directly transferred from ‘Freezer to Fire’ for ‘Heating and Eating’ or for thawing for further processing and cooking. Microwavable and ‘boil in’ packaging are available and is much in demand.

Edible Packaging: Now Cellulose based casings have replaced intestines which is edible and thus becomes part of the food. As we know cellulose is a major constituent of the vegetables and fruits. However its use is limited only to sausage production but promises a good scope for future in packing other food products too.

Labelling of Frozen Foods

Each food package needs to carry information regarding itself, its shelf life, its producer and any other information that is helpful to a customer in any way. These are mandatory information that must be over the packaging to meet regulatory requirements and voluntary information to help customer, educate customer or even to promote and propagate brand and producer. Precautionary information like “KEEP IT REFRGERATED” or Health related information also could be part of labeling.

Mandatory Requirements

Food manufacturing in India is controlled by PFA Act 1955. Frozen foods do not have any specific labeling requirements and are grouped as normal food and described in rule 32 to 36 in PFA act. Regulations are enforced mainly by three major departments-

  1. FPO (Food Product Order) – controls manufacturing of vegetarian foods or foods from botanical origin or their byproducts.
  2. MFPO (Meat Food Product Order) – controls animal origin or non- vegetarian foods.
  3. Weights and Measures or legal department of metrology.

First two agencies are responsible for the approval of a manufacturing/production facility depending on the type of food. Approved plant is issued with an approval number either FPO or MFPO and a logo. The logo is issued by FPO and is symbol of vegetarian origin and thus identifies vegetarian food. Positioning of logo and its size all are described in regulations. FPO or MFPO number of the facility, manufacturers full address along with telephone numbers and E-Mail address if available and country of origin (PRODUCT or PRODUCE OF INDIA) is mandatory over the packaging. An Imported product needs to have manufacturers name and address, country of origin and local distributors full address, phone and license nos.

NAME OF THE PRODUCT and its net content inside the pack or the net weight is mandatory information. Net weight should be printed in bold and in cover page in a prominently visible area.

DATE OF PRODUCTION and DATE OF EXPIRY or BEST BEFORE or USE BEFORE is another mandatory labeling requirement.

INGREDIENTS: If a food is fabricated with multiple ingredients then their labeling in descending order along with their percentage in the composition is required. If any preservative, flvour and colour are added in the food ,it must be declared.

Some people are ALLERGIC to some of the food ingredients and chemicals (ALLERGENS), if declared over packaging consumers can guide their purchases accordingly.

NUTRITIONAL VALUE: Declaration of nutritional value or nutritional facts, in terms of percentage of constituents like fat, protein, carbohydrates, salt, saturated fats, trans fats, cholesterol, vitamins and minerals and energy derived from them in terms of calories is required.

The consumer who are diabetic or suffering from cardiovascular diseases get informed through the label declarations and hence can safeguard their health.

TRACEABILITY CODE: Traceability code is now insisted upon in order to trace back the history of a product’s manufacturing or source of raw material and packaging in case of any eventuality and recall. It is generally mentioned as batch no or lot no. If food is found faulty, whole lot will need to be recalled from the market. Batch code may be day no or the date with shift or session which can be related with production history and other documents and data of the batch, hygiene and quality control data, raw material, ingredients and packaging sources for further analysis and corrective actions at the time of need.

MRP OR SELLING PRICE: To print selling price is mandatory and it must be for all reasons, so that customer is not defrauded and should be in know of the value for money for his pick.

Voluntary Information

Frozen Food Specific Labelling

Freezer sections in the household refrigerators are meant to store frozen product for a short durations in order to maintain its temperature. They can maintain temperature of a frozen commodity but they do not have in built capacity to freeze a product to -18 degree Celsius. Therefore if a product is kept for freezing in a refrigerator, it is subjected to slow freezing process which sets in nutrient migration(translocation of electrolytes) and damage to the tissue cells due to formation of bigger ice crystals and expansion inside the cells making them burst and release all nutrients.. That is the reason most of the time frozen product are labeled with a caution slogan saying

“HOLD OR STORE AT -18 DEGREE CELSIUS”

or
“KEEP IT REFRIGERATED”
or

”DO NOT REFREEZE AFTER THAWING

In Western countries packers also label duration of desired storage time and temperature to be maintained in the refrigerators.

They are denoted as one, two and three stars:

* one month storage –6 degree Celsius

** six months storage –12 degree cel

*** one year storage –18 degree cel

“Thaw in Running Water” Or “Freezer to Fire”

Ready to Eat (RTE) and Ready to Cook (RTC) is gaining momentum in India. This segment is witnessing a fast growth. Frozen RTE foods are “Freezer to Fire” products and do not need any thawing. They should go directly from freezer to Oven for heating before serving.

In the same way RTC food are prepared in a way to go directly into cooking vessel or the deep fryer.

RTE and RTC foods have just made entry into the Indian market and domestic Indian customers are not much experienced in handling such products. Therefore they need to be educated and that can be done by labeling such information and instructions over packaging.

Once subjected to temperature abuse, or thawing process, some of the frozen RTC foods like coated Breaded and Battered products disintegrate completely. Bread crumbs are bound with the core material with the help of batter solutions which contain gluten and hydrocolloids (glues). Gluten and glues together act as binding agents between core material and breadcrumb. This adhesion becomes stronger after freezing due to conversion of water from batter solution into ice that makes another bond with ice crystals of core material. When subjected to temperature abuse or thawed, ice crystals liquefy hence adhesion weakens and coating material may fall apart during frying. As customers do not know technicalities of the food, it is better to label and educate them.

Cooking Instructions

Some of the manufacturers also advise customers about cooking methods however such information is voluntary in nature. Different methods of cooking require different cooking media and cooking temperature. Like in a deep-frying process if oil temperature is lower than 170 degree celsius, first of all product is going to absorb more of oil and secondly browning reaction and caramelisation which produces pleasant flavours and appetizing colours, may not happen. Therefore it is always advisable to provide as much of information as possible.

Bar Coding

With outlets going high tech , it has become almost necessary to label packs with bar codes. This makes life of customer much easier and job of the sales men at counter much efficient.

Brand and Image Building Information

Although not mandatory however any manufacturer will not leave any chance to high-light his brand name. In most of the packaging this is the brand name, which is bold and bright. Companies also have liberty to dispense with information about the product, its health benefits or functionality of food if any like LOW IN FAT or LOW IN SALT or HIGH IN OMEGA 3, FORTIFIED WITH VITAMINS AND MINERALS or ORGANIC or NATURAL or CHOLESTEROL FREE ETC., about their company or food safety status or quality management certifications as “ISO CERTIFIED” or “HACCP IMPLEMENTED” and so on.

 

ALSO READ

1
2
3
 

Managing IPR

Managing Intellectual Property

Managing Intellectual Property

“Managing Intellectual Property” is a series of articles on intellectual property rights in the trade related matters. The series covers various dimensions of IPR, pertainign to the food processing industry, in the form of simplified legal text with suitable cases studies. We hope the series will benefit the food processors, policy makers, executives, managers, researchers, traders and other stakeholders in the processed food industry.Read More

Current Topics

Current Topics

‘Current topics’ provides the rapid advances in the food processing sector that have taken place in the recent past. The series is being contributed by Dr. V.H Potty – our editorial consultant and Deputy Director (Rtd), CFTRI. He is the doyen of food processing industry in India. We feel that an intensive review of the major issues concerning food processing industry would be of great value to our readers.

Read More

Recent Development

Recent Development

New developments in the sphere of processed food industry take place every now and then, which results in the overall development of the entire food sector. Dr. Rajat K. Baisya — our editorial consultant, and professor of marketing and strategic management at department of management studies, IIT Delhi — keeps a keen eye on these developments in food processing sector as and when they happen. The series has recently passed its 200 mark in its print version.
Read More

Cold Chain

Cold Chain Management

Keeping in view the importance of freezing and cold chain in food business 'Processed Food Industry' has decided to introduce a new series of article ‘A to Z of Frozen Food Operation’. The series is contributed by O S Gautam — a known food consultant and Director, Delicacy International — is being presented here. We hope our readers will be benefited by his experience and give us their feedback.
Read More

Supply Chain

Supply Chain

“Managing Supply Chain & Marketing of Food Products” The purpose of initiating this series of articles is to discus some important dimensions of food processing industry, which can be of some help for decision makers at various levels in food business. This series looks into macro-economic policy parameters, which affect food consumption and retailing patterns and consumer behaviours. We will also evaluate various micro-level developments in processed-food-industry world and their impact on food business, food retailing and consumer behaviour.
Read More

Events

 
 
anutec-india-2020
Copyright © 2019 All Rights Reserved | Designed & Developed by Netnovaz Web Solutions